Top 9 UNISAW Sliding Table – Table Saw Accessories

As an Amazon Associate I earn from qualifying purchases.

1. SawStop

#ad

SawStop TSA-SA48 Sliding Crosscut Table Attachment

#ad
SawStop #ad - The fence is at least 15% larger than typical crosscut sliders, spanning 43" and extending past 58". Micro-adjust for detail cuts, and crosscut full sheets with the 55" travel and 48" crosscut capacity. Large flip-stops with scale and magnified lenses help ensure accurate, repeatable cuts every time. This sliding table is built for versatility. Adjust the table to fit your needs.
BrandSawStop #ad
ManufacturerSawStop #ad
Height34 Inches
Length48 Inches
Weight87 Pounds
Width18 Inches
Part NumberTSASA48
ModelTSASA48
Warranty1 year

2. VEVOR

#ad

VEVOR Precision Miter Gauge, Miter Saw Fence w/Laser Marking Scale, 18" Aluminum Table Saw Miter Gauge w/ 60 Degree Angled Ends for Max. Stock Support and a Repetitive Cut Flip Stop

#ad
VEVOR #ad - The adjustable, solid aluminum head is machined with 11 positive stop holes. The steel miter bar is equipped with a removable metal retaining disc to prevent accidental lifting. Premium sturdy construction: this woodworking tool is made of aluminum alloy, ensuring its durability and sturdiness.

Compatible standeded slot: our table saw sled is suitable for a standard 075 x 038-inch miter slot. Simple & secure operation: an adjusting screw and guide wheel are added in the middle, which is more convenient to insert into the slot hole and fix the seat. 1 hole is at 90 degrees while the 5 holes on both sides are at 10, 30, 22. 5, 45, 60 and 90 degrees. Precise angle cutting: this table saw accessory is 004 inch / 1 mm high precision.

Metric and imperial scale makes your work more convenient. The miter gauges are flat without burr, secure, and hands-free. It is an economical solution for your table saw crosscutting needs. Miter gauge fence system is currently a must-have for every family. Laser marking technology is friction-resistance to ensure accuracy. It also can be used for router tables and jointers.
BrandVEVOR #ad
ManufacturerVEVOR #ad
Height4.7 Inches
Length22.4 Inches
Weight4 Pounds
Width5.1 Inches
Part Number18 inch Miter Gauge
Model18 inch Miter Saw Fence

3. Peachtree Woodworking Supply

#ad

Phenolic Zero Clearance Insert for Delta Uni-Saw Contractor | Large Grizzly and Other Table Saws with a 13-3/8” x 3-3/4” x 1/2” Throat Plate Opening

#ad
Peachtree Woodworking Supply #ad - Another great reason to use a zero clearance insert is to help reduce that pesky and irritating tear out you always tend to get on your cuts. Since every table saw brand and manufacturer is different, width and thickness of your table saw insert or opening and compare it to the size we list. This is especially true when cutting plywood.

This can cause that piece of wood to jam up against the blade and go flying across the room or worse yet, right back at you. The reason you would use zero clearance inserts with dado blades is to reduce the amount of tear out the dado blade set produces. We recommend that you use separate zero clearance inserts for dado blades since the gap for dados will be much wider than standard width table saw blades. Measure your factory insert and compare size before you order. Also be aware of the shape of your current insert of whether its round, we recommend that you measure the exact length, square ends or if there are any indents or protruding notches.

If you own a table saw, then you probably have had smaller pieces of wood get caught between the saw blade and the factory supplied throat plate opening. The insert features two snug Fit sand-able side tabs that allow you to remove a little material at a time for a perfect fit if necessary. This zero clearance insert is made from a high density phenolic material that was chosen for its ability to stand up to everyday workshop use. The insert also features a top and a side Snug Fit Screw for a tight fit to you saw with no movement!
BrandPeachtree Woodworking Supply #ad
ManufacturerFulton #ad
Weight1.23 Pounds
Part NumberAMZ-4133
Model4133

4. Peachtree Woodworking Supply

#ad

Delta UHMW Zero Clearance Table Saw Insert Approx Dims 13-3/8in x 3-3/4in x 1/2in

#ad
Peachtree Woodworking Supply #ad - Insert comes with leveling screws and rear safety pin. 13 3/8" x 3 3/4" x 1/2" thick- made of UHMW. Helps to prevent tear-out and closes the large factory gap between blade and insert. The insert is blank so you can custom fit the blade slot for standard Kerf, Thin Kerf or Dado blades. Please check your Length, Width and Thickness of your current insert before ordering.
BrandPeachtree Woodworking Supply #ad
ManufacturerPeachtree Woodworking Supply Inc #ad
Part NumberPw955

5. ChangTa

#ad

NEW 3 BELT REPLACEMENT SET After Market DELTA 49-124 DRIVE SET 3450 RPM MOTOR

#ad
ChangTa #ad - 26inch outside circumference x 1/2inch width. For delta unisaw, rockwell 34-761 Unisaw, 3 hp unisaw, 10" Unisaw. Fits delta unisaw saws with 3450 RPM motors. Fits many delta, rockwell, and Unisaw Table and Arbor Saws. Replacetment for delta 49-124 hd shaper drive / unisaw drive new belt set 3450 RPM MOTOR SET of 3.
BrandChangTa #ad
ManufacturerWest Coast Resale #ad
Height0.7 Inches
Length6.6 Inches
Weight7.5 ounces
Width5.3 Inches

6. Or1More

#ad

Non-Extended Race, Arbor Bearings Rockwell Delta Unisaw Table Saw Set of 2

#ad
Or1More #ad - They can replace the original bearings that are either rubber sealed or metal shielded. Replacement arbor bearings for later model Rockwell/Delta Unisaws with non-extended race Bearings. Set of 2. Replaces rockwell/delta part numbers: 1086894, 920-04-020-5335, SP-5335. These bearings have rubber seals on both sides. Bearings have a 17mm id, 40mm OD, and are 12mm wide.
BrandOr1More #ad
ManufacturerOr1More #ad

7. Shop Fox

#ad

57-Inch, Shop Fox W1716 Aluma-Classic Fence with Standard Rails

#ad
Shop Fox #ad - Fits most table saws easily. Easy single locking cam action lever. Steel and aluminum fence body for durability, strength, and reduced weight. Standard 57-inch rails provide 30-inch maximum rip to the right of the blade. Wide right angle design for maximum accuracy and support.
BrandShop Fox #ad
ManufacturerWoodstock International INC #ad
Height7 Inches
Length17.25 Inches
Weight53.3 Pounds
Width61 Inches
Part NumberW1716
ModelW1716

8. Leecraft

#ad

Leecraft DL-1U Zero Clearance Table Saw Insert for Delta Table Saw Colors may Vary

#ad
Leecraft #ad - Elimantes dangerous gap around blade where thin off-cuts can get wedged. Measures: 13-3/8" x 3-3/4" x 1/2" Please measure before ordering.

Fits: delta: unisaw & left-tilt unisaw, powermatic 63, grizzly g1023, "hybrid" & left-tilt contractor, jet ctas-10, 35680, steel city 35605, 35675, 10" tilt arbor saw, 10" contractor, 22124, 22114, Sears Craftsman 22104, 35610, bridgewood bw10ts, 35670, 35685. Includes leveling screws, side and end adjustment screws; rear safety pin; precut blade bottom pocket for fully retracted blades and bevel cuts. Offers superior rigidity, flatness, durability, and low friction; reduces chip-out and splintering.
BrandLeecraft #ad
ManufacturerLeecraft #ad
Height3 Inches
Length8 Inches
Width3 Inches
Part NumberDL-1U
ModelDL-1U

9. Delta

#ad

36-805, UNISAW Zero Clearance Throat Plate, Delta

#ad
Delta #ad - Package weight :1. 7lbs. Product Type :Tools. Package dimensions :1. 3 cm l x16. 4 cm w x45. 1 cm H. Country of Origin :Taiwan.
BrandDelta #ad
ManufacturerDelta Power Equipment Corporation #ad
Height0.55 Inches
Length18 Inches
Weight1.6 Pounds
Width6.5 Inches
Part Number36-805
Model36-805
Warranty2 Year