As an Amazon Associate I earn from qualifying purchases.
POWERTEC #ad - Application: a necessary addition to your collection of workshop tools for creating woodworking jigs and fixtures for your router table, band saw or table saw.
Versatility: the top mounting holes are 5” on center, while the side mounting holes are 4” on center – providing you with a host of mounting options. Includes: 2 jig and fixture Bar with a set of 10-32 nylon adjustment screws mounting hardware.
POWERTEC #ad - Application: a necessary addition to your collection of workshop tools for creating woodworking jigs and fixtures for your router table, band saw or table saw.
Versatility: the top mounting holes are 3" on center, while the side mounting holes are 3” on center - providing you with a host of mounting options. Includes: 2 jig and fixture Bar with a set of 10-32 nylon adjustment screws mounting hardware.
Peachtree Woodworking Supply #ad - There are also three counter sunk holes on the bar to mount the bar using #8 wood screws not included. Not only is the fulton steel miter bar adjustable, jig or fixture platform or base, its easy to mount! you can mount the bar from the top of your sled, or you can mount it from the bottom. Build your next table saw sled, router table jig or band saw fixture to operate with a smooth sliding action using the Fulton 18 inch Precision Steel Miter Bar! Attach the steel bar to most any type of sled, jig or fixture that is to be used with a 3/4 inch 19mm by 3/8 inch 9mm miter slot.
This is especially true when you first run the bars through your miter slots.
The smooth sliding action is perfect for crosscut sleds, miter angle jigs, shop made coping sleds and a whole lot more! Using two bars only one is included for even more stability works exceptionally well. When building sleds, jigs and fixtures one of the most important aspects is to achieve a smooth sliding action without side to side play. The fulton precision steel Miter Bar does both with its solid steel bar and 4 adjustable spring loaded plungers. Non-standard slots found on some job site style table saws and other small machinery will not accept this bar due to the non-standard slot dimensions.
Peachtree Woodworking Supply #ad - Even though its "slick", it does not leave behind any residue which means no clean up after use. The idea behind using uhmw material for making jigs & fixtures is that the material stands up to friction better than wood and lower quality or lower density plastics.
Uhmw ultra high molecular weight polymer plastic is a linear polyethylene material with a molecular weight in the range of 3, 000 to 6, 000, 000, 000. Length of bar may vary slightly. Made in the usa! This makes it ideal for sleds where repetitive sliding happens regularly.
Use this uhmw to make jigs and fixtures for your table saw, etc. We all know how residue left on a table saw can be rather irritating and even harder to remove. Its also very slick in comparison to wood and other plastics. Use the 3/4" x 3/8" plastic strips to make sliding table jigs for your table saw, router table, band saw or router table. We all know how residue left on a table saw can be rather irritating and even harder to remove.
FTVOGUE #ad - These rockler miter bar easily in the miter slot when adjusted well, there is no side to side movement at all which makes for very accurate cuts.
For building various jigs on your table saw, like miter sleds etc. This is a miter bar usually used in table saw woodworking works. Universal threaded mounting holes for convenient use. Miter slot bar is easy to assemble, making it very easy to construct that ideal jig without dealing with the wood runners and the swelling issues.
Estink #ad - Easy installation: Universal threaded mounting holes for convenient use. Table saw tool: Adjustable stainless steel runner for perfect sliding action. Designed for: this is a miter bar usually used in table saw woodworking works. Wide application: for building various jigs on your table saw, like miter sleds etc.
POWERTEC #ad - Function: ideal for creating customized high-utility sliding jigs, while featuring a functional design that prevents play lifting for safer, sleds and fixtures, high precision accuracy.
Customizable: 48 inch profile can be custom cut to suit your individual project needs and specifications. Versatile: a perfect fit for all 3/4" x 3/8" t-slotted -miter slots and standard table saws with t- slotted miter tracks, router table, and band-saw table applications.
Build: this aluminum t-bar extrusion possesses a thick, heavy duty exterior that won’t warp or alter in shape, and is precision machined to accommodate a variety of woodworking applications, ensuring long term durability. Includes: 1 48" Miter T-Bar.
Hatsbi #ad - Extremely durable – ideal for constant repetitive use. Outstanding impact strength - even at low temperatures. Jigs, fixtures or miter slots 3/4” x 3/8” – ideal for table saw, band saw or router table.
Does not absorb moisture and will not swell up over time due to exposure. Very slick and self lubricating – very high abrasion resistance. Uhmw won’t expand or contract like wood does.
Uhmw bars won’t leave any residue, dust or shavings. Excellent sliding material - due to the low coefficient of friction it has, which makes it ideal for sleds where repetitive sliding is necessary. Uhmw ultra high molecular weight Polymer plastic is 10 times heavier than regular high-density polyethylene for stability.
TOPINCN #ad - Easy install: easy assembling, makes it very easy to construct that ideal jig without dealing with the wood runners and the swelling issues. Durable table saw tool: this is a miter bar usually used in table saw woodworking works.
Wide application: for building various jigs on your table saw, like miter sleds etc. Exquisite design, the tools are simple and easy to use, and the utility is strong.
Wanrane #ad - Adjustable stainless steel runner for perfect sliding action. This is a miter bar usually used in table saw woodworking works. For building various jigs on your table saw, like miter sleds etc.
1. POWERTEC
#adWoodworking, Router Table, Table Saw, 2PK, Band Saw, POWERTEC 71520-P2 36-Inch Miter Gauge Jig & Fixture Bar for any Standard 3/4" x 3/8" Miter Slot/Crosscut Sled
#adVersatility: the top mounting holes are 5” on center, while the side mounting holes are 4” on center – providing you with a host of mounting options. Includes: 2 jig and fixture Bar with a set of 10-32 nylon adjustment screws mounting hardware.
More information #ad
Quality build: this miter gauge bar is manufactured with high precision aluminum – delivering a polished profile, excellent fit and long-term durability. Functional design: features 7 countersunk mounting holes along the top of the bar plus an additional non-countersunk hole, with 9 tapped holes 10/32” on the side – All holes are clean and burr free.| Brand | POWERTEC #ad |
| Manufacturer | POWERTEC #ad |
| Part Number | 71520-P2 |
| Model | 71520-P2 |
More information #ad
2. POWERTEC
#ad2PK, Woodworking, POWERTEC 71518-P2 18-Inch Miter Gauge Jig & Fixture Bar for for any Standard 3/4" x 3/8" Miter Slot/Crosscut Sled, Table Saw, Router Table, Band Saw
#adVersatility: the top mounting holes are 3" on center, while the side mounting holes are 3” on center - providing you with a host of mounting options. Includes: 2 jig and fixture Bar with a set of 10-32 nylon adjustment screws mounting hardware.
More information #ad
Quality build: this miter gauge bar is manufactured with high precision aluminum – delivering a polished profile, excellent fit and long-term durability. Functional design: features 6 countersunk mounting holes along the top of the bar plus an additional non-countersunk hole, with 6 tapped holes 10/32" on the side – All holes are clean and burr free.| Brand | POWERTEC #ad |
| Manufacturer | POWERTEC #ad |
| Part Number | 71518-P2 |
| Model | 71518-P2 |
More information #ad
3. Peachtree Woodworking Supply
#adJigs and Fixtures to Slide in 3/4 inch by 3/8 inch Miter Slots, 18” Precision Steel Miter Bar Rail Runner with Adjustable Spring Loaded Plungers For DIY Table Saw Crosscut Sleds
#adThis is especially true when you first run the bars through your miter slots.
More information #ad
Using our steel bar versus plastic or aluminum gives your sled, jig or fixture more strength and stability and it won’t bend or warp. The bar is approximately 18 inches long and will fit into miter t slots and u-shaped miter slots. The plungers can be adjusted with the included hex key wrench for just the right fit. The smooth sliding action is perfect for crosscut sleds, miter angle jigs, shop made coping sleds and a whole lot more! Using two bars only one is included for even more stability works exceptionally well. When building sleds, jigs and fixtures one of the most important aspects is to achieve a smooth sliding action without side to side play. The fulton precision steel Miter Bar does both with its solid steel bar and 4 adjustable spring loaded plungers. Non-standard slots found on some job site style table saws and other small machinery will not accept this bar due to the non-standard slot dimensions.
| Brand | Peachtree Woodworking Supply #ad |
| Manufacturer | Peachtree Woodworking Supply Inc #ad |
| Part Number | 3337 |
| Model | 3337 |
More information #ad
4. Peachtree Woodworking Supply
#adRouter Table and Bandsaws 2 UHMW Bars, Fixtures or Miter Slots size 3/4" x 3/8". Slick Durable Material Slides with Ease. Ideal for Table Saws, UHMW Precision Milled Bar 3/4" X 3/8" X 36" For Jigs
#adUhmw ultra high molecular weight polymer plastic is a linear polyethylene material with a molecular weight in the range of 3, 000 to 6, 000, 000, 000. Length of bar may vary slightly. Made in the usa! This makes it ideal for sleds where repetitive sliding happens regularly.
More information #ad
Even though its "slick", it does NOT leave behind any residue which means no clean up after use. Uhmw is 10 times heavier than regular high density polyethylene making it extremely durable for constant repetitive use. Use this uhmw to make jigs and fixtures for your table saw, etc. We all know how residue left on a table saw can be rather irritating and even harder to remove. Its also very slick in comparison to wood and other plastics. Use the 3/4" x 3/8" plastic strips to make sliding table jigs for your table saw, router table, band saw or router table. We all know how residue left on a table saw can be rather irritating and even harder to remove.
| Brand | Peachtree Woodworking Supply #ad |
| Manufacturer | Peachtree Woodworking Supply Inc. #ad |
| Part Number | 1120 |
| Model | 11520 |
More information #ad
5. FTVOGUE
#adFTVOGUE Aluminium Alloy Miter Bar Slider Table Saw Miter Gauge Rod Wood Woodworking Tool 450mm/17.71inch
#adFor building various jigs on your table saw, like miter sleds etc. This is a miter bar usually used in table saw woodworking works. Universal threaded mounting holes for convenient use. Miter slot bar is easy to assemble, making it very easy to construct that ideal jig without dealing with the wood runners and the swelling issues.
More information #ad
Adjustable stainless steel runner for perfect sliding action. This miter rod is made of high quality aluminium alloy, miter bar is of strong strength and reliable durability for several year using without abusing.| Brand | FTVOGUE #ad |
| Manufacturer | FTVOGUE #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Weight | 0.49 Pounds |
| Width | 0 Inches |
| Part Number | FTVOGUEykmrfhdqet-01 |
More information #ad
6. Estink
#ad300mm / 11.81'' 300 Slider, Aluminium Alloy Miter Bar Slider Table Saw Gauge Rod Woodworking Tool for Building Various Jigs on Your Table Saw, Miter Bar
#adMore information #ad
Exquisite design, the tools are simple and easy to use, and the utility is strong. Sutiable screw Size: M6 screw, Tapping screw. Quality aluminium alloy: made of high quality aluminium alloy materials, it is of strong strength and long durability, long service life.| Brand | Estink #ad |
| Manufacturer | Estink #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Width | 0 Inches |
| Part Number | OCC-LCM-JYA02621-02 |
| Model | OCC-LCM-JYA02621-02 |
More information #ad
7. POWERTEC
#ad48-Inch, aluminum grey, POWERTEC 71146 Aluminum Miter T-Bar
#adCustomizable: 48 inch profile can be custom cut to suit your individual project needs and specifications. Versatile: a perfect fit for all 3/4" x 3/8" t-slotted -miter slots and standard table saws with t- slotted miter tracks, router table, and band-saw table applications.
More information #ad
Also works with for powertec 71167, miter t-Track, drill press, making this miter bar ideal for benchtop table-saw extensions, for creating extension, jigs and other woodworking requirements. Build: this aluminum t-bar extrusion possesses a thick, heavy duty exterior that won’t warp or alter in shape, and is precision machined to accommodate a variety of woodworking applications, ensuring long term durability. Includes: 1 48" Miter T-Bar.
| Brand | POWERTEC #ad |
| Manufacturer | POWERTEC #ad |
| Height | 0.5 Inches |
| Length | 48 Inches |
| Width | 1 Inches |
| Part Number | 71146 |
| Model | 71146 |
More information #ad
8. Hatsbi
#adHatsbi UHMW Crosscut Sled For Table Saw Sled Miter Bars 3/4" X 3/8" X 36" -Predrilled holes and 20 screws included For Jigs Fixtures or Miter Slots size 3/4"x3/8" 2 UHMW Bars
#adDoes not absorb moisture and will not swell up over time due to exposure. Very slick and self lubricating – very high abrasion resistance. Uhmw won’t expand or contract like wood does.
More information #ad
The non-stick surface is easy to clean. Predrilled holes - each bar has 10 exact size designed predrilled and countersunk holes for 20 specific sized screws included that ensures no expanding of the material when screws are inserted. Uhmw bars won’t leave any residue, dust or shavings. Excellent sliding material - due to the low coefficient of friction it has, which makes it ideal for sleds where repetitive sliding is necessary. Uhmw ultra high molecular weight Polymer plastic is 10 times heavier than regular high-density polyethylene for stability.
| Brand | Hatsbi #ad |
| Manufacturer | Lurentice Trading Ltd #ad |
| Height | 0.78 Inches |
| Length | 36 Inches |
| Width | 0.78 Inches |
| Part Number | QD2102001 |
More information #ad
9. TOPINCN
#adMiter Bar Slider Table Saw Gauge Rod Woodworking Tool Aluminium Alloy Saw Blades Parts Accessories300mm
#adWide application: for building various jigs on your table saw, like miter sleds etc. Exquisite design, the tools are simple and easy to use, and the utility is strong.
More information #ad
These bars slide easily in the miter slot when adjusted well, there is no side to side movement at all which makes for very accurate cuts. Adjustable runner: Adjustable runner for perfect sliding action. High strength aluminium alloy: made of high quality materials, it is of strong strength and long durability, for several year using without abusing.| Brand | TOPINCN #ad |
| Manufacturer | Floverd #ad |
| Height | 0.39 Inches |
| Length | 11.81 Inches |
| Width | 0.79 Inches |
| Part Number | Floverdsgtdobinqw-02 |
More information #ad
10. Wanrane
#adWanrane Miter Bar,450mm Aluminum Alloy Rail Miter Bar Slider Table Saw Gauge Rod Wood Working Tool
#adMore information #ad
Universal threaded mounting holes for convenient use. Made of high quality materials, it is of strong strength and long durability.| Brand | Wanrane #ad |
| Manufacturer | Wanrane #ad |
| Weight | 1 Pounds |
| Part Number | Wanrane |
More information #ad
