Jake Sales#ad - Self drilling tek screw use with wood Thickness of up to 1-5/16" and Mild Steel thickness of 3/16". Torx/star drive countersinking Screw Head is Neat and Clean & Holds Material in Place Securely.
Wood reamer tek screws wings Break off after going through the Wood and Contacting the Steel. Reamer tek screws are coated with the Bronze Star Triple Ceramic Coating for Exterior Protection-. 5 pound quantity has approximately 275 Tek Screws. Use torx/star drive T-30 Torx Screw Bit.
For consistent performance, the material in which the threads are cut should have a lower hardness of at least 10-20 Rockwell points. Material - hardened steel rc 45 minimum case hardness | blaCK PHOSPHATE & OIL COATING - Provides corrosion Resistance.
Self tapping trailer deck screws - designed specifically for attaching wood floors into truck trailers, brass, aluminum, cast iron, castings, but they can be used in a number of different applications such as those involving fastening to heavy gauge sheet metal, and plastic.
Newport Fasteners#ad - Black phosphate and oil Finish. The head design of floorboard Screws provide a flush surface in countersunk holes. Floor board screws are specially designed for installing wood floors into truck trailers.
Six-lobe recess Flat Heads Floorboard. Self tapping thread cutting Screws - Measure length from the top of the head to the tip. The oil serves as a rust inhibitor and a lubricant. For this reason, they are perfect in floorboard fastening applications.
#adU-Turn Fasteners, Inc#ad - These screws exceed 1000/hrs of salt spray resistance. Wings break off as they come into contact with metal. Deep chip cavity - allows screws to cut threads more effectively into metal.
Tek 4 drill point - gives screw a drill capacity of. 110" -. 375" through metal. Reamer - self tapping wood to metal tek screw - attaches wood to metal 3/4" - 1-3/4" Wood Thickness to.
110" -. 375" metal Thickness. Recommended drill Speed is 1350 RPM. Wings - allow screw to ream through wood before the screw reaches metal, preventing jacking action and providing smooth installation all the way through. Coated - for use in pressure treated lumber and other highly corrosive environments. W. A. R.