Top 10 Rare Earth Magnets 1/4 – Hoist Accessories

As an Amazon Associate I earn from qualifying purchases.

1. Artooo


100PCS Small Round Magnets,Rare Earth Neodymium Magnets,Permanent,Fridge,DIY,Scientific,Craft and Office Magnets 5-Size6x3,8x3,10x3,12x3,15x3

Artooo #ad - Simplify your life : 5 sizes 6x2. 8mm, office magnets, 8x2. 8mm, whiteboard magnets, note or picture holder, 15x2.8mmeach size 20pcs-these round magnets have enough strength to be used as fridge magnet, 12x2. 8mm, sign, hardware tools hanger, 10x2.8mm, crafts, map magnets, DIY material and so much more.

Hanging What You Want. Widely used : these round magnets have enough strength to be used as fridge magnet, note or picture holder, whiteboard magnets, hardware tools hanger, map magnets, Crafts, sign, office magnets, DIY material and so much more. Such as important reminders, lockers, refrigerators, photos, Jewelry, Office boards, use magnets to frames or souvenirs Crafting, Even Creat DIY Magnets. Diy-crafting or decorate: perfect of magnets for hanging what you Want.

30-days return policy and 24-Month Warranty Service. No-scratch technology: superior corrosion resistance and Provide a Smooth and clean finish surface, look like stainless steel. Each stainless Steel magnets won't leave a single scratch on it. Do not worry it might scratch the fridge or your new table. 100% satisfaction guarantee: your purchase is protected, we provide Excellent after-sale Service. Fulfilled by amazon with offering you a full refund for 30 days.
BrandArtooo #ad
ManufacturerMAGNETS00A #ad
Part NumberRare Earth Neodymium Magnets
ModelRare Earth Neodymium Magnets



Irwin Tools IWAF252C Single 3" Length Bit Holder with C-Ring and 1/4" Hex Shank

IRWIN #ad - Tool-grade construction is suitable for most general-purpose fastener-driving needs. Uses a rare earth magnet that is 4 times more powerful than common magnets. Designed for insert bits only. C-ring design has internal clip that fits into retaining ring notch of insert bit to hold bit securely in place. Can be used with socket wrench or socket adapter.
BrandIRWIN #ad
ManufacturerIRWIN #ad
Height0.23 Inches
Length3 Inches
Weight0.1 Pounds
Width0.5 Inches
Part NumberIWAF252C



Pack of 10, Perfect for Home, Workplace, 95 LB(43KG)Heavy Duty Magnetic Hooks with Countersunk Hole Eyebolt, Office and Garage, Kitchen, BAVITE Magnetic Hooks

E BAVITE #ad - The magnet has permanent magnetism, which will be the same powerful even in a few decades. High quality: powerful magnetism is concentrated only at the bottom, and there is almost no magnetism on the other three sides.

Force permanent, long service life. 60 days money back guaranteed! permanent strength: neodymium is a rare earth metal, which is suitable for making permanent magnets and strong magnets. Best coating: ni+cu+ni triple Layer Coated. Multi use: unique countersunk hole and eyebolt design, lifting, suitable for magnet salvage, suitable for underwater salvage of various ferronickel materials, suspension and recycling applications.

Under ideal conditions, the magnet can provide 95LBS 43KG of strength. This coating can effectively prevent the cracking and decay of magnets. Powerful magnets: the base diameter of the magnet is 32 mm and the height is 24 mm. Made under iso 9001 Quality Systems.
BrandE BAVITE #ad
ManufacturerE BAVITE #ad
Part Numberdh-10

4. Klein Tools


Klein Tools 32303 Multi-Bit Screwdriver / Nut Driver, Square, Impact Rated 14-in-1 Magnetic Screwdriver Set Phillips, Combo, Torx, Slotted

Klein Tools #ad - Industrial-strength bits that are conveniently housed in the handle. Stainless steel bit holder contains powerful Rare-Earth magnet for securing bits and fasteners. Rare-earth magnets for securing bits and fasteners. Multi-bit screwdriver includes 13 different screwdriver bits and a 1/4-Inch nut driver. Impact rated blade can be removed for use as an impact driver attachment. Cushion-Grip handle for maximum comfort. Adjust the length of the blade for easier access.
BrandKlein Tools #ad
ManufacturerKlein Tools #ad
Height1 Inches
Length1 Inches
Weight0.55 Pounds
Width1 Inches
Part Number32303

5. Proto


Stanley Proto J6910MPF 1/4-Inch Drive Metric High Strength Magnetic Power Socket, 6 Point, 10mm

Proto #ad - Power sockets with high surface hardness are used in high-speed assembly operations. Ideal for nut runners. Protogrip magnetic Sockets require no bushings to hold the magnet in place. Designed to easily pick up heavy fasteners and hold them tightly during use. Strong magnetic hold helps increase efficiency when installing fasteners in awkward or hard-to-reach locations. Protogrip magnetic sockets use high-strength magnets made from a rare earth magnet alloy/nylon blend.
BrandProto #ad
ManufacturerStanley Proto #ad
Height0.6 Inches
Length0.9 Inches
Width0.6 Inches
Part NumberJ6910MPF

6. Magnet Driver


Magnet Driver™ Screw-Holder by Micaton | Magnetic Screwdriver Attachment | Fits Screwdrivers and Power Bits | No Wobbling or Falling Screws | Allows Countersinking B33PH

Magnet Driver #ad - Make sure every screw is just as confident as you are with the Magnet Driver! This also helps to prevent stripped screws, ensuring that your screw stays attached to the bit. Neodymium magnets – rare-earth magnets are extremely powerful, helping to prevent cross-threading by ensuring a direct drive. Color coded – don’t fumble around your tool kit looking for the correct size.

Every item in the magnet driver line contains the same color-coded sizing, so no matter which set you get, all sizes will be easily found. Don’t waste time looking for the right bit – use the magnet driver to save time and energy! Versatile – whether you are using a screwdriver or impact driver, the Magnet Driver was made to work with them all! With a soft rubber base, the Magnet Driver can be compressed to ensure a solid drive and allows for countersinking. The magnet drivers easily identified colors allow you to find the proper size with ease. Efficient – free up your other hand for anything else you may need with the Magnet Driver! Using two hands to apply one screw is not only tedious, it is also less stable for larger projects.

Simply slide your magnet driver sleeve over the properly fitting power bit and utilize the rare earth magnet to help keep your bits in place. Traditional magnetized bits may help to keep the screw in place but lack the strength to keep the bit from falling off. Three different fits – the b33ph comes with a 3/16”, and a 1/4” diameter sleeve, 15/64”, to fit on a multitude of screwdrivers and power bits. The design of the magnet driver keeps your screw straight, as the Magnet Driver will keep your screw securely fastened onto your screwdriver.
BrandMagnet Driver #ad
ManufacturerMicaton #ad
Part NumberB33PH

7. Steelex


Steelex D1009 1-1/4" Forstner Bit

Steelex #ad - Precision ground shank. 3/8" shank, 3-1/2"es long. Saw toothed. Manufactured from high-carbon tool steel.
BrandSteelex #ad
ManufacturerSteelex #ad
Height4 Inches
Length2.5 Inches
Weight0.24 Pounds
Width1.7 Inches
Part NumberD1009

8. Klein Tools


Klein Tools MAG2 Demagnetizer / Magnetizer for Screwdriver Bits and Tips, Makes Tools Magnetic with Powerful Rare-Earth Magnet

Klein Tools #ad - Fits most screwdrivers including precision screwdrivers, 1/4 Slotted, #2 Phillips and #3 Phillips. Made in usA with global components. Attaches to tool bags or backpacks with the included stainless steel key ring. Single swipe operation provides immediate magnetization and demagnetization screwdriver tips and bits. No batteries required. Makes your screwdriver magnetic using powerful Rare-Earth magnets. Us patent pending.
BrandKlein Tools #ad
ManufacturerKlein Tools #ad
Height0.7 Inches
Length2.2 Inches
Weight0.07 Pounds
Width1.1 Inches
Part NumberMAG2
Warranty1 year manufacturer

9. Klein Tools


Klein Tools 50611 Magnetic Wire Puller, Rare Earth Magnet, Fishes and Pulls Wire Cable Behind Walls or Tight Spaces, Stainless-Steel Leader

Klein Tools #ad - 180-degree pivot handle with a comfort grip provides easy control and maneuverability. Powerful rare earth magnets provide strong hold for easy wire and cable pulling through insulated walls, ceilings, etc. Flexible leader made of quality stainless steel and features a wide eyelet for cable or multiple wires. Mar-resistant wheels are easy rolling and reduce marks on finished walls. Easy to use magnetic wire puller quickly and easily fishes wire and cable behind finished walls and enclosed spaces.
BrandKlein Tools #ad
ManufacturerKlein Tools #ad
Height1 Inches
Length1 Inches
Weight1 Pounds
Width1 Inches
Part Number50611

10. Triton Products


Triton Products 72423 MagClip Socket Caddy and 28 Interchangeable Pegs 1/2-Inch Drive 6-1/8-Inch by 10-1/4-Inch, Red

Triton Products #ad - 28 rare earth magnets hold up to 28 sockets for 1/2-Inch drive size tight and in place and will never magnetize the sockets. Standard, metric, shallow or deep sockets are no challenge for Mag-Clip Socket Caddy. Magnets retain strength permanently with no loss in holding capability over time. Grease, oil, chemical and rust resistant with tough polymer base.
BrandTriton Products #ad
ManufacturerTriton Products #ad
Height12.25 Inches
Length1.15 Inches
Weight2.66 Pounds
Width6.5 Inches
Part Number72423
Warranty2 Year