As an Amazon Associate I earn from qualifying purchases.
1. RioRand #ad
RioRand 7-70V PWM DC Motor Speed Controller Switch 30A #adRioRand #ad
- Pwm frequency: 12KHZ. Adjust the motor smooth no noise no vibration, with power indication, wide duty cycle adjustment range. Potentiometer cable（about 15CM） can be separated, with running stop brake function.
Using imported high-voltage MOS tube, three pressure 100V high-frequency low-resistance capacitors, automotive fuses. Suitable for long hours of work:Circuit optimization design, stable.
|Model||7-70V PWM DC|
2. Sydien #ad
Sydien 10V-55V 12V 24V 36V 48V 40A Stepless DC Motor Speed Controller with Forward-Brake-Reverse Switch,Ajustable Potentiometer &Digital Display #adSydien #ad
- Potentiometer with switch function, High power speed controller switch which is much more adaptable. Dc10v-55v pwm brushed dc motor speed controller Adjustable Driver CW CCW Reversible Switch With Digit Display. Input supply voltage: dc 10v-55v;maximum current: 60A;Continuous current: 40A;Speed range: 0-100%.
The input voltage must differentiate "+", "-", the input voltage should be equal to the rated voltage of the motor within 10-55V, or it will be burnt. Outer casing: it is designed to protect the controller board from damage as well as dissipate heat.
3. PEMENOL #ad
PEMENOL Motor Speed Controller PWM DC 5V 12V 24V 150W Adjustable Speed Regulator with Stepless Variable Rotary Switch PWM Signal Generator Driver Module #adPEMENOL #ad
- Parameter memory function The adjustable electronic speed controller can automatically save the set parameters to prevent data loss after a power failure. Comes with start and stop button and can be controlled by external switch.
Digital encoder button With infinitely variable speed controller setting, precise engine speed control and easy-to-adjust control. Can adjust the duty cycle, the upper and lower duty cycle limits and the operating frequency.
Features lcd hd display. Protective function anti-reverse protection, the reverse connection does not burn.
For detailed instructions, the power supply end and the load end have anti-reverse protection, see the link: http://attach01. Oss-us-west-1. Aliyuncs. Com/ic/datasheet/13861. Pdf. Soft-start protection pemenol the motor controller has a soft-start protection function that can effectively reduce the inrush current, protect the motor and prolong the life of the motor.
4. SP #ad
PWM DC Motor Speed Controller 9V 12V 24V 36V 48V DC 9V, 55V Pulse Width Modulation Regulator 40A 2000W Stepless Variable Speed/Forward and Reverse Switch Pulse Width Modulation DC Speed Regulation #adSP #ad
- Pwm: pulse width modulation pwm with wide/variable speed has the advantage of making full use of the energy of the power supply, and the circuit is efficient.
Note: do not switch another direction when running at high speed. Product parameters: dc input voltage range 9v 12V 24V 48V 55V, output current 0-40A, power 2000W.
Speed control: our motor control board can adjust the motor speed through potentiometers, and support clockwise/counterclockwise rotation adjustment. It can not be used on electric vehicles, nor on Unnet speed reducer motors. Widely used: dc motor driver can be used for DC motor speed regulation and dimming.
5. DROK #ad
DROK L298 Dual H Bridge Motor Speed Controller DC 6.5V-27V 7A PWM Motor Regulator Board 12V 24V Electric Motor Control Module Industrial 160W with Optocoupler Isolation, DC Motor Driver #adDROK #ad
- Pwm speed control: enable signal terminal ENA input PWM can regulate speed, PWM frequency range 0-10KHZ. Under voltage protection: the motor driver module is with under voltage protection to prevent instantaneous large current from damaging the module.
Strong drive: the motor controller board adopts dual H bridge, can drive two DC motors at the same time.
Forward and revsersely rotate: the in1, in2/in3, in4 port can control forward or reverse motor rotation. Drok dc motor driver input voltage range is dc 6. 5v-27v, can be input dc 12v or 24v, rated output current of each port is 7A, total output power is 160W.
6. NCElec #ad
PWM DC Motor Speed Controller 12V 24V 36V 48V 2000W MAX 60A Reversible #adNCElec #ad
- Using imported high-voltage MOS tube, three pressure 100V high-frequency low-resistance capacitors, automotive fuses. Note: the digital display is the percentage of the total motor speed 0-100, not the actual motor speed.
Input voltage: dc10-55v equal to the nominal motor voltage output voltage: linear under load. Adjust the motor smooth no noise no vibration, with power indication, wide duty cycle adjustment range. Maximum current: 60 to direct current: 40 A.
7. Qunqi #ad
Qunqi 2Packs L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper For Arduino #adQunqi #ad
- Large capacity filter capacitance, afterflow protection diode, more stable and reliable. High working power to 35v, large current can reach 3A MAX and continue current is 2A, power to 25w.
To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage.
Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability. Dual-channel h-bridge driver working mode creates higher working efficiency, L298N as main chip. Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.
8. Onyehn #ad
Onyehn 2Pcs 1.8v 3v 5v 6v 7.2v 12v 2A 30W Low Voltage DC Motor Speed Controller PWM 1803BK 1803B Adjustable Driver Switch 2 Pack #adOnyehn #ad
- It is not recommended to supply power greater than 12V, such as 12V lead-acid batteries, which may cause damage to the governor. Don't buy it wrong.
If the continuous current is greater than 05a, the 775 motor and the stroller motor will not move. Pwm dc motor speed controller with switch function. This is a speed governor with a maximum current of 2a. If the current is too large, it will be automatically disconnected, and the fuse will automatically recover after cooling.
This brand new 1803bk dc motor speed controller allows controlling the direction of a DC the motor using a Pulse-Width-Modulated PWM DC voltage with a Duty Cycle fully the product adjust from 0%-100%. With a self-recovery fuse 2A and a Power-On LED light.
9. UCTRONICS #ad
DC 10-55V/60A, UCTRONICS DC Motor Speed Controller, Forward-Brake-Reverse Switch and LED Display, Stepless Motor Controller with Adjustable Potentiometer #adUCTRONICS #ad
- Excellent heat dissipation performance - Aluminum shell prevents it from easily damaged, holes on its side and top and six heatsinks are helpful for heat dissipation.
Accurate display - the led display is accurate to show 0 ~ 100% of the motor speed. Current modulation, NOT Pulse Width Modulation PWM. Regulate range - input voltage: dc 10-55v, continuous current: 60A, Max current: 100A.
Conveniently change the motor direction - The Forward-Brake-Reverse switch is convenient to change the direction of the motor without adjusting the order of the motor lines. Easy to install and operate - Simple potentiometer knob adjusts the motor speed from 0% ~ 100% smoothly.
10. SP #ad
60V Pulse Width Modulation Regulator 10A 600W Stepless Variable Speed/Forward and Reverse Switch Pulse Width Modulation DC Speed Regulation, PWM Motor Speed Controller 9V 12V 24V 36V 48V 60V DC 9V #adSP #ad
- Pwm speed regulator the advantage of using a pulse width modulation PWM method for dimming / speed regulation is that the energy of the power supply can be fully utilized and the circuit is highly efficient.
High quality circuit board ensures stable and durable performance. Suitable for DC motors within 10A. Durable performanceusing high quality and delicate metal shell, no rust, safe and convenient to use.
9-60v voltage adjustable the adjustable voltage range can be truly smooth and adjustable from 9V to 60V, continuous power is 600W. It can govern speed stepless 0%-100%, using advanced technology, offering high efficiency, Operating frequency: 25KHZ.
Reverse polarity protection. Motor speed regulation easily control voltage and speed via the adjustable rotary knob. Pwm the advantage of using a pulse width modulation PWM method for dimming / speed regulation is that the energy of the power supply can be fully utilized and the circuit is highly efficient.