As an Amazon Associate I earn from qualifying purchases.
1. Lynx #ad
Auxiliary Handle with Hardware for Lynx One Man Cross Cut Saw #adLynx #ad
- Overall length about 7” including the hardwood handle and hardware. Note: requires a hole in the saw blade at the intended attachment location. Easy to attach and detach. Diameter of the handle is about 1-3/8” at the thickest point.
Reverse the process to remove. Original helper handle for the Lynx One Man Cross Cut Saw. Slide the blade into the handle’s bolt slot, insert the pin through the hole, line up the profile washer and twist the handle clockwise to tighten. Turns your one man saw into a two man saw if attached at the tip of the saw blade.
2. Jemco Tool Corporation #ad
Two-Man Cross Cut Saw Handle #adJemco Tool Corporation #ad
- Fits our #33-55 or any saw with 1/4"id or larger holes less than 1-1/8" in from end of saw. Steel sockets, pins and screws draw up tight, reversible in case of wear.
Price is for each handle - sold individually. Tough xylon coating protects body from corrosion. Selected hardwoods shaped to fit hands with comfort, sanded and lacquered.
3. Great Neck #ad
GreatNeck N2610, Hardwood Handle, 26 Inch 12 TPI Cross Cut Hand Saw #adGreat Neck #ad
- Durable materials: the blade of this 26 inch handsaw is made of high carbon steel. Perfect length: this hand saw features a 26 Inch 12 TPI blade that is ideal for rougher, more aggressive cuts.
Exact cutting: the blade is precision set and has sharpened teeth to provide a greater cutting ability. Protected by: if something happens to this wood saw during normal, everyday use, it should be covered by the GreatNeck Limited Lifetime warranty.
See product manual for full warranty conditions and restrictions. Cut a variety of wood pieces with this saw. Comfortable grip: this carpenter saw features a weather-resistant dark stained hardwood handle for a sturdy grip.
|Brand||Great Neck #ad|
|Manufacturer||Great Neck Saw #ad|
|Warranty||GreatNeck Limited Lifetime|
4. SUIZAN #ad
SUIZAN Japanese Pull Saw Hand Saw 9.5 Inch Ryoba Double Edge for Woodworking #adSUIZAN #ad
- Japanese style pull saw: this product is a “pull saw”. What most people are used to are european saws, ” which is what this product is. Diversify your woodworking life: no matter you are a master or a beginner in using saws, it gives you brand new experience from using tranditional western style saws, and enables you to make more varified woodworkings products and thus change your life! Japanese steel: all suizan japanese saws are consisted of top quality japanese steel.
It uses high quality Japanese steel, which makes cuts to be sharp. Made in japan: all suizan products are manufactured in japan by japanese master craftsmen. With a history of over 100 years in making japanese hand tools, all of the process gone into making tools were completed in one of Japan’s towns known for their craft making tradition: Sanjō in Niigata.
In comparison to “push saws, thus are called “push saws. On the other hand, japanese saws cut materials via pulling and thus are called “pull saws, requires less power, ” “pull saws” are lighter in weight, which cut materials via pushing, and the resulting edge is cleaner.
|Part Number||Japanese Saw 01|
|Model||Japanese Saw Ryoba(Double Edge)|
5. IRWIN #ad
IRWIN Hand Saw, 15-Inch 2011201, Coarse Cut, ProTouch Handle #adIRWIN #ad
- The pro-touch handle helps ensure comfort and durability. A thick-body blade gives rigidity and control. This carpenter saw uses M2 tooth technology and Tri-Ground teeth for fast, efficient cuts.
The pro-touch handle helps ensure comfort and durability. This carpenter saw uses M2 tooth technology and Tri-Ground teeth for fast, efficient cuts.
A tapered-pitch nose on this carpenter saw provides improved clearance and stability. A thick-body blade gives rigidity and control. Deep gullets on this carpenter saw remove chips quickly. A tapered-pitch nose on this carpenter saw provides improved clearance and stability. Deep gullets on this carpenter saw remove chips quickly.
6. Corona #ad
21 Inch, Corona Razor Tooth Raker Saw, RS 7160 #adCorona #ad
- Tempered-steel alloy for durability: Will not bend or break while cutting large branches and limbs. Self-cleaning raker tooth pattern: Keeps blade clean so you can continue cutting without having to stop to clean sap off.
Impulse hardened teeth for long service life: Extends the life of the tool season after season. For larger branches and limbs: 3 sided razor teeth with 21" blade. Precision-milled, laminated wood handle: D shaped handle provides a comfortable cutting grip.
|Manufacturer||Corona Clipper #ad|
7. AIRAJ #ad
Pruning,Trimming Gardening and Cutting Wood Drywall Plastic Pipes Branches and More Comfortable Ergonomic Non-Slip Handles, AIRAJ 18" Quick Cutting Hand Saw,Perfect for Sawing #adAIRAJ #ad
- Eour service-if you have any questions, we will reply you in 12 hours, please contact us directly, and give you satisfactory solution. The woodwork saw a quick cut in the garden cutting process.
Bquick cutting: the three cutting surfaces are 50% faster than traditional hand saws. Dergonomic handle - The soft rubber grip gives you a comfortable, solid feel when sawing. Cdetachment groove design: professional-grade hand-held landscaping trimming saw with anti-backing groove to prevent wood chips from blocking the groove and cutting more smoothly.
Aeasy to use: the airaj professional hand saw is designed for precision cutting, a gardener or a contractor in the manual cutting of wood, serrations and cutting heads. Not only fast, but the face is flat. Whether you are a woodworker, plywood, including handles, plastic pipes, wallboard and other materials.
8. Lynx #ad
Lynx 3' One Man Crosscut Saw #adLynx #ad
- Each tooth is hand set. British cs80 steel, 1. 5mm thick blade. Special great american Tooth pattern for use on logs, etc. Can be re-sharpened using a large triangular file. Beech handle, plus auxiliary handle for use as a two-man version if required.
9. Lynx #ad
Lynx 4' Two Man Crosscut Saw #adLynx #ad
- 2 large beech handles. Peg tooth 1 tpi pattern for use on logs, etc. Each tooth is hand set. Can be re-sharpened using a large triangular file. British cs80 steel, 1. 5mm thick blade.
10. Lynx #ad
Lynx 5' Two Man Crosscut Saw #adLynx #ad
- Each tooth is hand set. Peg tooth 1 tpi pattern for use on logs, etc. British cs80 steel, 1. 5mm thick blade. Can be re-sharpened using a large triangular file. 2 large Beech handles.