Top 10 26mm Hole Saw – Hole Saws

As an Amazon Associate I earn from qualifying purchases.

1. uxcell

#ad

Uxcell 26mm HSS Drill Bit Hole Saw Cutter for Metal Alloy Wood

#ad
uxcell #ad - Perfect for installing locks, knobs in Doors and Cabinets or Drilling Larger Diameter Holes Through Desks Etc. Hole saw is suitable for hand-held electric drill, vertical electric drill and mobile belt magnetic drilling machine. Hole saw is made of HSS high speed steel, impact resistance, wear resistance. Hole drill bit is with special heat treatment, sharp edge, high strength. 26mm hole saw cut clean, aluminum plate, alloy plate, round holes in iron, plastic sheet.
Branduxcell #ad
Manufactureruxcell #ad
Part Numbera18072800ux0456
Modela18072800ux0456

2. Rannb

#ad

Iron, Rannb 38mm/1.5 Inch Hole Saw Carbide Tipped Hole Saw for Cutting Stainless Steel Plate, Steel

#ad
Rannb #ad - Applicable materialyou can easily to drill on the stainless steel plate, iron, castings, steel, aluminum alloy and other metal plate drilling. Package content1 x hole saw + 1 x L Wrench + 2 x Pilot Drill Bit. Ideal designsplit tip pilot drill prevents damage by gradually guiding cutter to material. Dimensioncutting dia: 38mm/ 1. 5";shank dia: 10mm/04" ;hole saw depth : 25mm/ 1". Materialour hole saw adopts premium Tungsten Carbide TippedTCT with high hardness and good wear resistance.
BrandRannb #ad
ManufacturerRannb #ad

3. uxcell

#ad

High Density Carbide Tooth, uxcell 26mm Carbide Hole Cutter, 2pcs, TCT Hole Saws for Stainless Steel Sheet Metal

#ad
uxcell #ad - All in one: drill bit, wrench are included, spring, no need to buy any extra accessories for the drilling works. General purpose: can provide fast and precise cuts into stainless steel sheet, cast iron plate and other metals.

Suitable for round or square pipes, equipment cabinet. High density carbide tooth hole cutter is with longer life than normal carbide and metal cutting hole cutters. Specifications: cutting dia. 26mm / 039"; cutting depth: 20mm / 1. 02"; shank size: 10mm / 079"; overall length: 66mm / 2. 6"; non-slip triangular shank. Warm tips: keep the drill running evenly at a low speed or pre-drill the center hole for extending hole cutter life. Application: can be used on hand held drill, bench drills, magnetic drills, pneumatic drills and other rotating machines. Please add coolant or water when working on stainless steel and steel metal sheets above 5mm.
Branduxcell #ad
Manufactureruxcell #ad
Part Numbera19120400ux0767

4. uxcell

#ad

TCT Hole Saws for 5mm Stainless Steel Sheet Metal, uxcell 26mm Carbide Hole Cutter

#ad
uxcell #ad - Carbide hole cutter is with longer life than normal metal cutting hole cutters. Application: can be used on hand held drill, bench drills, magnetic drills, pneumatic drills and other rotating machines.

All in one: drill bit, spring, wrench are included, no need to buy any extra accessories for the drilling works. General purpose: can provide fast and precise cuts into stainless steel sheet, cast iron plate and other metals below 5mm. Warm tips: keep the drill running evenly at a low speed or pre-drill the center hole for extending hole cutter life. Specifications: cutting dia. 26mm / 1. 02"; shank size: 10mm / 039"; cutting depth: 25mm / 098"; overall length: 106mm / 4. 17"; non-slip triangular shank. Please add coolant or water when working on stainless steel and steel metal sheets above 5mm. Suitable for round or square pipes, equipment cabinet.
Branduxcell #ad
Manufactureruxcell #ad
Height1.57 Inches
Length3.94 Inches
Width1.57 Inches
Part Numbera18061100ux0396
Modela18061100ux0396

5. Rannb

#ad

Rannb Pack of 3 HHS Drill Bit Hole Saw Set Hole Opener for Plate Hole, Home Wood, Fire Pipe-3 Size 24mm+26mm+28mm 24mm 26mm 28mm

#ad
Rannb #ad - Widely used in plate hole, bench Drill, Plastic, Gypsum Board and Other Opening Operation. Efficiencyeach drill bit is equipped with small holes around the wall, which can improve the speed to expel the chips when working.

It can automatically pushes the disc out of the saw immediately after completing the hole. Sharp teeththe teeth is sharp and vibarition is less, which enable more stable operation and make the hole can be cut with quick speed and balance. Wide applicationsuitable for pistol drill, home Wood, galvanized pipe, Fire Pipe, Vertical Drilling Machine etc. Spring loadedthe hole saw dirll bit is attached with spring. Materialthe hole saws are made of M42 Bi-Metal, offering a combination of hardness and toughness for wear resistance.
BrandRannb #ad
ManufacturerRannb #ad

6. Drill Warehouse

#ad

Rocaris 13Pcs 16mm-53mm Stainless Steel Carbide Tip TCT Metal Drill Bit Hole Saw Set

#ad
Drill Warehouse #ad - Outside diameter size: 16mm, 28mm, 22mm, 25mm, 18mm, 30mm, 26mm, 35mm, 40mm, 50mm, 45mm, 20mm, 53mm. The gears is made from yg8 tungsten carbide steel and the rigidity varies from the hole saw has a twist drill bit inside, which is undetachable.

Sharp gears and anti-cutting with lower consumption make the product a long service life. 64hrc to 65hrc. Cuts quick, iron, copper and brass. Can drill about 20mm depth for the wood, precise holes in stainless steel, mild steel, and can drill about 5mm for the stainless steel. Carbide teeth for fast cutting of clean, round holes. Suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine.
BrandDrill Warehouse #ad
ManufacturerRocaris #ad
Weight1.98 Pounds
Part NumberHole Saw Arbors
ModelHole Saw Arbors

7. EZARC

#ad

EZARC Tungsten Carbide Teeth Hole Saw Hole Cutter Heavy Duty for Stainless Steel 2-1/8'' 54mm

#ad
EZARC #ad - Provide fast and precise cuts into stainless steel, sheet metal, FRP and wood. Extreme durability and no teeth breakage for any tough job. Replaceable high quality pilot drill bit are available. All in one design: drill bit, spring, wrench are included, no need to buy any extra accessories for the drilling works. Smooth cuts with perfect cutting result.
BrandEZARC #ad
ManufacturerEZARC #ad
Height5.51 Inches
Length3.35 Inches
Width4.33 Inches
Part Number804036

8. uxcell

#ad

Uxcell 2PCS 26mm Diamond Coated Hole Saw Drill Bits for Glass Ceramic Tile Marble Rock Porcelain

#ad
uxcell #ad - Applications - perfect for drilling glass, limestone, marble, ceramics, light stone and fiberglass. Nickel plated surface - Nickel plating surface can extend the service life and enhance the surface corrosion resistance.

Diamond coated - diamond coating enhances the drilling speed, which makes the bit more sharp. Size - 26mm1. 02-inch drilling Diameter, 8mm031-inch Shank Diameter. Side open can remove the waste to keep the drill bit clean. Special design - slotted edge makes it more sharp, works more efficient. Need to be used at a low speed; always use lubrication water when processing, granite, ceramic tile, porcelain tile, slate, porcelain, otherwise the hole saw will burn.
Branduxcell #ad
Manufactureruxcell #ad
Part Numbera16121200ux1015
Modela16121200ux1015

9. Hanperal

#ad

Hanperal 12Pcs HSS Hole Saw Bit, high Speed Steel Drill bits Set for Metal Wood Alloy Thickness 3mm---50mm, Hole Saw Opener Cutting Tool

#ad
Hanperal #ad - Gives you fast, Convenient and steady Cutting. 12 pcs different size Hole Saw With Hex Key. Optimal rotational Speed:280~300r/min. Outside diameter:15mm, 16mm, 20mm, 25mm, 28mm,30mm, 18mm, 26mm, 22mm, 35mm, 21mm, 50mm. Cutting tool for steel, Wood, Aluminum, Metal, Tiles, Boards etc.
BrandHanperal #ad
ManufacturerHanperal #ad
Part NumberHR-250132

10. uxcell

#ad

Uxcell Forstner Drill Bits 26mm, Tungsten Carbide Wood Hole Saw Auger Opener Woodworking Hinge Hole Drilling Boring Bit Cutter Gray with Case

#ad
uxcell #ad - Features: tungsten carbide cutting tip with special heat treatment for sharp cutting edge, non-burrs and durable use. Specifications: drilling dia. 26mm; shank size: 8mm; drilling depth: 49mm; total length: 80mm.

How to use: suitable for bench drill, impact drill, vertical drilling machine, hand held electric drill, CNC carving machine and other drill press. Arc curve design head for easy chip-removal, high hardness, more efficient perforation. Rotation speed suggested: 18000-24000 RPM, feed speed suggested: 8-12M/Min. Please note the cutting depth before you purchase. Applications: can be used for drilling holes on wood and plastic products, plywood, door hinge.

Round shank, cemented carbide cutter and solid hardened steel body. Before drilling, be sure no nails or other metal objects in wood to avoid causing damage to forstner drill bits. Warm tips: can not be used for cutting metal holes. Used on cutting wood, plastics, furniture, solid wood boards, MDF, fiberglass etc.
Branduxcell #ad
Manufactureruxcell #ad
Height0.98 Inches
Length3.74 Inches
Width0.98 Inches
Part Numbera18121400ux0143